 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| INTEGRATED CIRCUITS NE/SA/SE5534/5534A Single low noise operational amplifier Product data Supersedes data of 1994 Aug 31 File under Integrated Circuits, IC11 Data Handbook 2001 Aug 03 Philips Semiconductors Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A DESCRIPTION The NE/SA/SE5534/5534A are single high-performance low noise operational amplifiers. Compared to other operational amplifiers, such as TL083, they show better noise performance, improved output drive capability, and considerably higher small-signal and power bandwidths. This makes the devices especially suitable for application in high quality and professional audio equipment, in instrumentation and control circuits and telephone channel amplifiers. The op amps are internally compensated for gain equal to, or higher than, three. The frequency response can be optimized with an external compensation capacitor for various applications (unity gain amplifier, capacitive load, slew rate, low overshoot, etc.) PIN CONFIGURATIONS NE/SA/SE5534/5534A D, N Packages BALANCE INVERTING INPUT NON-INVERTING V- 1 2 3 4 TOP VIEW 8 7 6 5 BALANCE/ COMPENSATION V+ OUTPUT COMPENSATION SL00336 Figure 1. Pin Configuration FEATURES * Small-signal bandwidth: 10 MHz * Output drive capability: 600 , 10VRMS at VS = 18 V * Input noise voltage: 4nV Hz * DC voltage gain: 100000 * AC voltage gain: 6000 at 10 kHz * Power bandwidth: 200 kHz * Slew rate: 13 V/s * Large supply voltage range: 3 to 20 V ORDERING INFORMATION DESCRIPTION 8-Pin Plastic Small Outline (SO) package 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Small Outline (SO) package 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Small Outline (SO) package 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) APPLICATIONS * Audio equipment * Instrumentation and control circuits * Telephone channel amplifiers * Medical equipment TEMPERATURE RANGE 0 C to +70 C 0 C to +70 C 0 C to +70 C 0 C to +70 C -40 C to +85 C -40 C to +85 C -40 C to +85 C -55 C to +125 C -55 C to +125 C ORDER CODE NE5534D NE5534N NE5534AD NE5534AN SA5534N SA5534AD SA5534AN SE5534N SE5534AN DWG # SOT96-1 SOT97-1 SOT96-1 SOT97-1 SOT97-1 SOT96-1 SOT97-1 SOT97-1 SOT97-1 2001 Aug 03 2 853-0222 26833 Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A ABSOLUTE MAXIMUM RATINGS SYMBOL VS VIN VDIFF Tamb Supply voltage Input voltage Differential input voltage1 Operating temperature range NE SA SE Storage temperature range Junction temperature Power dissipation at 25 C 2 SO8 package DIP8 package Output short-circuit duration3 Tsld Lead soldering temperature (10 sec max) PARAMETER RATING 22 V supply 0.5 0 to +70 -40 to +85 -55 to +125 -65 to +150 150 750 1150 Indefinite 230 C UNIT V V V C C C C C mW mW Tstg Tj PD NOTES: 1. Diodes protect the inputs against over voltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential input voltage exceeds 0.6 V. Maximum current should be limited to 10 mA. 2. For operation at elevated temperature, derate packages based on the following junction-to-ambient thermal resistance: 8-pin plastic DIP 105 C/W 8-pin plastic SO 160 C/W 3. Output may be shorted to ground at VS = 15 V, Tamb = 25 C. Temperature and/or supply voltages must be limited to ensure dissipation rating is not exceeded. DC ELECTRICAL CHARACTERISTICS Tamb = 25 C; VS = 15 V, unless otherwise specified. 1, 2, 3 SYMBOL VOS Offset voltage VOS/T IOS Offset current IOS/T IB Input current IB/T ICC VCM CMRR PSRR AVOL VOUT Supply current per op amp Common mode input range Common mode rejection ratio Power supply rejection ratio Large-signal voltage gain Output swing RL 600 , VO = 10 V Over temperature RL 600 Over temperature RL 600 ; VS = 18 V RL 2 k Over temperature Over temperature 12 70 25 15 12 10 15 13 12 30 13 100 10 100 13 12 16 13.5 12.5 100 38 Over temperature 5 4 8 10 12 80 100 50 25 12 10 15 13 12 50 Over temperature 200 500 1500 2000 Over temperature 5 20 300 400 PARAMETER TEST CONDITIONS NE/SA5534/5534A Min Typ 0.5 Max 4 5 SE5534/5534A Min Typ 0.5 5 10 200 400 5 4 13 100 10 100 13 12 16 13.5 12.5 100 38 6.5 9 800 1500 200 500 Max 2 3 UNIT mV mV V/C nA nA pA/C nA nA nA/C mA mA V dB V/V V/mV V/mV V V V V V k mA 50 RIN ISC Input resistance Output short circuit current NOTES: 1. For NE5534/5534A, TMIN = 0 C, TMAX = 70 C 2. For SA5534/5534A, TMIN = -40 C, TMAX = +85 C 3. For SE5534/5534A, TMIN = -55 C, TMAX = +125 C 2001 Aug 03 3 Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A AC ELECTRICAL CHARACTERISTICS Tamb = 25 C, VS = 15 V, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS AV = 30 dB closed-loop f = 10 kHz; RL = 600 ; CC = 22 pF Voltage-follower, VIN = 50 mV RL = 600 ; CC = 22 pF, CL = 100 pF 20 20 VIN = 50 mV, RL = 600 CC = 47 pF, CL = 500 pF 50 35 f = 10 kHz, CC = 0 f = 10 kHz, CC = 22 pF CC = 22 pF, CL = 100 pF CC = 0 CC = 22 pF VOUT = 10 V, CC = 0 pF VOUT = 10 V, CC = 22 pF VOUT = 14 V, RL = 600 CC = 22 pF, VCC = 18 V 6 2.2 10 13 6 200 95 70 50 35 6 2.2 10 13 6 200 95 70 ns % V/mV V/mV MHz V/s V/s kHz kHz kHz 20 20 ns % NE/SA5534/5534A Min Typ 0.3 Max SE5534/5534A Min Typ 0.3 Max UNIT ROUT Output resistance Transient response tR Rise time Overshoot Transient response res onse tR AV GBW SR Rise time Overshoot Gain Gain bandwidth product Slew rate Power bandwidth ELECTRICAL CHARACTERISTICS Tamb = 25 C, VS = 15 V, unless otherwise specified. SYMBOL VNOISE INOISE PARAMETER In ut Input noise voltage In ut Input noise current Broadband noise figure Channel separation TEST CONDITIONS fO = 30 Hz fO = 1 kHz fO = 30 Hz fO = 1 kHz f = 10 Hz to 20 kHz; RS = 5 k f = 1 kHz; RS = 5 k 110 NE/SA/SE5534 Min Typ 7 4 2.5 0.6 Max NE/SA/SE5534A Min Typ 5.5 3.5 1.5 0.4 0.9 110 Max 7 4.5 UNIT nV/Hz nV/Hz pA/Hz pA/Hz dB dB 2001 Aug 03 4 Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A EQUIVALENT SCHEMATIC 1 8 5 7 2 3 6 4 SL00337 Figure 2. Equivalent Schematic 2001 Aug 03 5 Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A TYPICAL PERFORMANCE CHARACTERISTICS Open-Loop Frequency Response 120 TYPICAL VALUES 16 VS = +15V CC 12 CC = 0 40 CC = 22pF S8 (V/s) TYP 0 4 0 40 GAIN (dB) 5 8 Slew Rate as a Function of Compensation Capacitance Closed-Loop Frequency Response 60 TYPICAL VALUES CC = 0; RF = 10k; RE = 100 80 GAIN (dB) 20 CC = 0; RF = 9k; RE = 1k CC = 22pF; RF = 1k; RE = -40 10 102 103 104 105 106 107 f (Hz) 0 0 40 80 CC(pF) -20 103 104 105 106 107 f (Hz) 108 Large-Signal Frequency Response 40 VS = +15V TYPICAL VALUES 30 CC = 0pF 22pF 47pF 60 80 Output Short-Circuit Current 1,4 VS = +15V 1,2 Input Bias Current VS = +15V (V) Vo(p-p) 20 IO 40 (mA) TYP II (A) 0,8 TYP 10 20 0,4 0 102 103 104 105 106 107 f (Hz) 0 -55 -25 0 0 25 50 75 100 +125 -55 -25 0 25 50 75 100 +125 Tamb (oC) Tamb (oC) Input Commom-Mode Voltage Range 30 TYPICAL VALUES 6 Supply Current per Op Amp 102 IO = 0 TYP 10 Input Noise Voltage Density 20 VIN (V) 10 NEG IP IN 4 TYP Hz) 1 (nV 2 POS (mA) 10-1 0 0 10 Vp; -VN (V) 20 0 0 10 20 Vp; -VN (V) 10-2 10 102 103 104 f (Hz) SL00338 Figure 3. Typical Performance Characteristics 2001 Aug 03 6 Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Input Noise Current Density 102 106 105 Total Input Noise Density TYPICAL VALUES 102 Broadband Input Noise Voltage TYPICAL VALUES 10 Vn(rms) In(rms) (pA Hz) 1 (nV TYP Hz) 104 103 102 10 10 10Hz 1kHz Vn(rm 1 s) (V) 200Hz TO 4kHz THERMAL NOISE OF SOURCE RESISTANCE 10-1 10Hz TO 20kHz 10-1 1 10-1 10 102 103 104 f (Hz) 10-2 10-2 10-2 10 102 103 104 105 106 RS () 0 10 20 RS () SL00339 Figure 4. Typical Performance Characteristics (cont.) TEST LOAD CIRCUITS V+ CC 22k 100k 8 2 CC 5534 3 1 2 5 7 6 5534 VI RE 100pF 600 8 RS 25 6 + 5 RF + 3 4 V- Frequency Compensation and Offset Voltage Adjustment Circuit Figure 5. Test Load Circuits Closed-Loop Frequency Response SL00340 2001 Aug 03 7 Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A NOISE TEST BLOCK DIAGRAM CAL OSC POWER SUPPLY +VCC -VCC CAL METER BANDPASS AT 1kHz + DUT 10k +40dB 100 TEST BOARD GND BANDPASS AT 30Hz (nV Hz) 1 (nV Hz) SL00341 Figure 6. Noise Test Block Diagram 2001 Aug 03 8 Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A SO8: plastic small outline package; 8 leads; body width 3.9 mm SOT96-1 2001 Aug 03 9 Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A DIP8: plastic dual in-line package; 8 leads (300 mil) SOT97-1 2001 Aug 03 10 Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A NOTES 2001 Aug 03 11 Philips Semiconductors Product data Single low noise operational amplifier NE/SA/SE5534/5534A Data sheet status Data sheet status [1] Objective data Preliminary data Product status [2] Development Qualification Definitions This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Product data Production [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 (c) Koninklijke Philips Electronics N.V. 2001 All rights reserved. Printed in U.S.A. Date of release: 12-01 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. Document order number: 9397 750 09179 Philips Semiconductors 2001 Aug 03 12 |
Price & Availability of SE5534A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |